Gigabyte GA-X99-Ultra Gaming - Page 47

BIOS Setup
- 47 -
& CPU VRIN Loadline Calibration
 AllowsyoutosettheLoad-LineCalibrationlevelfortheCPUVRIN.Thelevelsare(fromhighesttolowest):
Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the Vcore more consistent
with what is set in BIOS under heavy load. AutoletstheBIOSautomaticallycongurethissettingandsets
thevoltagefollowingIntel'sspecications.(Default:Auto)
& CPU VRIN Protection
 Allowsyoutosettheover-currentprotectionlevelfortheCPUVRINvoltage.Theadjustablerangeisfrom
150.0mV to 400.0mV. AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)
& DDR CH(A/B) Voltage Protection
Allows you to set the voltage limit on Channel A and Channel B memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 325.0mV. AutoletstheBIOSautomaticallycongurethissetting.
(Default: Auto)
& DDR CH(C/D) Voltage Protection
Allows you to set the voltage limit on Channel C and Channel D memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 325.0mV. AutoletstheBIOSautomaticallycongurethissetting.
(Default: Auto)
& CPU VRIN Current Protection
 Allowsyoutosettheover-currentprotectionlevelfortheCPUVRINvoltage.
Auto     LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents
differentlevelofover-currentprotectionfortheCPUVRINvoltage.
& DDR CH(A/B) Current Protection
Allows you to set the over-current protection level for Channel A and Channel B memory voltage.
Auto     LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents
different level of over-current protection for the memory voltage.
& DDR CH(C/D) Current Protection
Allows you to set the over-current protection level for Channel C and Channel D memory voltage.
Auto     LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents
different level of over-current protection for the memory voltage.
& CPU VRIN PWM Thermal Protection
 AllowsyoutosetthePWMthermalprotectionthresholdfortheCPUVRIN.Theadjustablerangeisfrom
120
o
C~130
o
C. (Default: Auto)
& CPU VRIN PWM Switch Rate
 AllowsyoutosettheCPUVRINPWMfrequency.Theadjustablerangeisfrom400.0KHzto600.0KHz.
(Default: Auto)
& DDR CH(A/B) PWM Switch Rate
Allows you to set the PWM frequency for Channel A and Channel B memory. The adjustable range is from
300.0KHz to 500.0KHz. (Default: Auto)
& DDR CH(C/D) PWM Switch Rate
Allows you to set the PWM frequency for Channel C and Channel D memory. The adjustable range is from
300.0KHz to 500.0KHz. (Default: Auto)