Do you have a question about the Gigabyte GA-Z170X-Gaming 3 and is the answer not in the manual?
Non-ECC | Yes |
---|---|
Memory slots type | DIMM |
Supported memory types | DDR4-SDRAM |
Maximum internal memory | 64 GB |
Supported memory clock speeds | 2133, 2400, 2666, 2800, 3000, 3200, 3300, 3333, 3400, 3466 MHz |
Processor socket | LGA 1151 (Socket H4) |
Processor manufacturer | Intel |
Compatible processor series | Intel Celeron, Intel Pentium |
Thunderbolt headers | 1 |
Number of SATA III connectors | 6 |
Number of SATA Express connectors | 3 |
USB 3.2 Gen 1 (3.1 Gen 1) connectors | 2 |
RAID levels | 0, 1, 5, 10 |
Supported storage drive interfaces | M.2, SATA III |
BIOS type | UEFI AMI |
ACPI version | 5.0 |
eSATA ports quantity | 0 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Component for | PC |
Motherboard chipset | Intel® Z170 |
PC health monitoring | CPU, FAN, Temperature, Voltage |
Audio output channels | 7.1 channels |
Motherboard form factor | ATX |
Parallel processing technology support | 2-Way CrossFireX, 2-Way SLI, 3-Way CrossFireX |
Depth | 235 mm |
---|---|
Width | 305 mm |
Essential safety guidelines and procedures for installing the motherboard and components to prevent damage.
Setup guide for AMD CrossFire™ and NVIDIA® SLI™ technologies with system requirements.
Overview of internal headers for power, fans, USB, front panel, and other essential connections.
Configuration options for CPU and memory frequencies, overclocking, and clock ratios.
Allows adjustment of CPU frequency and clock ratio based on CPU capabilities.
Defines the sequence for booting the operating system from various storage devices.
Procedure for setting up RAID arrays using Intel Rapid Storage Technology or legacy ROM.