Gigabyte GA-Z270M-D3H - Peripherals Configuration Options; Initial Display and RAID Setup; Ambient LED, PTT, and Trusted Computing; Serial and Parallel Port Control

2-5 Peripherals
& Initial Display Output
 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscardortheonboard
graphics.
IGFX   Setstheonboardgraphicsastherstdisplay.
PCIe1Slot SetsthegraphicscardonthePCIEX16slotastherstdisplay.(Default)
PCIe2Slot SetsthegraphicscardonthePCIEX4slotastherstdisplay.
& EZ RAID
 AllowsyoutoquicklysetupaRAIDarray.RefertoChapter3,"ConguringaRAIDSet,"forinstructions
onconguringaRAIDarray.
& Ambient LED
Enables or disables the onboard audio LED function.
Off Disables this function.
On Enables this function. (Default)
& Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
PTT Technology. (Default: Disabled)
& OffBoardSATAControllerConguration
Displays information on your M.2 PCIe SSD if installed.
` Trusted Computing
Enables or disables Trusted Platform Module (TPM).
` SuperIOConguration
& Serial Port
Enables or disables the onboard serial port. (Default: Enabled)
& Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
- 30 -