Gigabyte GA-Z68X-UD7-B3 - Page 102

Appendix - 102 -
Step 3:
On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-
ceed with the Windows XP installation.
For the Marvell 88SE9128:
InserttheoppydiskcontainingtheSATAAHCIdriverandpress<Enter>.Thescreenwilldisplaytwodriv-
ers, both of which need to be installed (Figure 3). First select Marvell shared library (install rst) and press
<Enter>. On the next screen, press <S> to return to the screen in Figure 3. Then select Marvell 91xx SATA
Controller 32bit Driverandpress<Enter>.Whenbothofthetwodriversappearontheconrmationscreen,
press <Enter> to continue the driver installation.
Figure 3
Windows Setup
  YouhavechosentocongureaSCSIAdapterforusewithWindows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select F3=Exit
Marvellsharedlibrary(installrst)
Marvell 91xx SATA Controller 32bit Driver