Gigabyte GA-Z77-D3H - Page 91

- 91 - Appendix
Step 2:
Connect an audio device to an audio jack. The Please select
a function dialog box appears. Select the device according
to the type of device you connect. Then click OK.
Step 3:
Go to the Speaker screen. On the Speaker Setting and
Test tab, select 2, 4, 6, or 8-channel speaker according to
the type of speaker conguration you wish to set up. Then
the speaker setup is completed.
If your chassis provides an AC'97 front panel audio module, to
activate the AC'97 functionality, click the Advanced Options
icon on the bottom right corner to open the Advanced
Options dialog box. Do not select the Enable front panel
jack detection check box. Click OK to complete.
Click the Advanced Options icon on the bottom right
corner to open the Advanced Options dialog box. Select
the When plug in Headphone, mute Speaker check box.
Click OK to complete.
B. Conguring Sound Effect
You can congure an audio environment on the Environmental Modeling tab.
C. Activating an AC'97 Front Panel Audio Module
D. Muting the Back Panel Audio (For HD Audio Only)