- 23 - Hardware Installation
Pin No.
1 +12V
2 GND
Voltage Measurement Points
Users can use a multimeter to measure component voltages, including VCORE, CPU VTT, VSA, CPU PLL, DDR
VTT, VDIMM, and PCHIO. You can employ following way to measure component voltages.
VCORE
Pin 1
CPUVTT
Pin 1
VSA
Pin 1
CPUPLL
Pin 1
DDRVTT
Pin 1
VDIMM
Pin 1
PCHIO
Pin 1
Steps:
Connect the red lead of the multimeter to the pin 1 (+12V) of a voltage
measurement point and the black lead to the pin 2 (ground).
To Next Page
Loading...
