Need help?Do you have a question about the Gigabyte GC-WB1733D-I and is the answer not in the manual?
General| Interface | WLAN / Bluetooth |
|---|---|
| Connectivity technology | Wireless |
| Internal | Yes |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Bluetooth version | 5.0 |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| Security algorithms | EAP-AKA, EAP-SIM, EAP-TLS, PEAP, TTLS, WPA, WPA2 |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11e, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11w |
| Maximum data transfer rate | 1733 Mbit/s |
| Antennas quantity | 1 |
| Harmonized System (HS) code | 85176990 |
Detailed steps for physically installing the Wi-Fi/Bluetooth card and its accessories.
Install the Wi-Fi/Bluetooth card in a PCI Express x1 slot and connect one end of the USB cable.
Connect the other end of the USB cable to the F_USB connector on the motherboard.
Securely connect the antenna cables to the antenna connectors on the Wi-Fi/Bluetooth card.
Move the antennas to a location with good signal reception after installation.
Instructions for installing drivers and adjusting wireless LAN settings after setup.
Guidelines and precautions for RF exposure and proper antenna handling during operation.
Details of compliance with FCC rules and operational conditions for the device.
Compliance statements for Canadian and European Union regulations and directives.
Information on product disposal according to WEEE directive and environmentally safe recycling.
To Next Page
