GN-B49G High-Speed Wireless Broadband Router
24
Select one of the following authentication settings: Auto, CHAP
or PAP. The default setting is “Auto” (automatic authentication).
Challenge Handshake Authentication Protocol
(CHAP) is the
most common authentication method using PPP dialup method.
With CHAP, the server will send a challenging signal to a remote
Router, which will send back an encryption key.
Password Authentication Protocol
(PAP) is a simple PPP
authentication protocol allowing a Router to send a simple user
ID and password to another Router for authentication. PAP has
been defined in RFC1334.
Connection
Automatic When the GN-B49G is powered on, it
automatically establishes a connection with the
network. If the link becomes disconnected for
any reason, the GN-B49G will re-connect
automatically.
Manual When you click “connection”, the system will
establish a connection to the network. If the link
becomes disconnected for any reason, the
GN-B49G will not
re-connect automatically.
Dial on Demand
Enable When there is no Internet activity for a period, the
WAN connection will automatically end. If a
browser is launched again, the GN-B49G will
automatically connect to Internet.
Disable When there is no Internet activity for a period, the
WAN connection will automatically end. If a
browser is launched again, the GN-B49G will not
automatically connect to Internet.
Static IP Address Tab
To Next Page
Loading...