GN-B49G High-Speed Wireless Broadband Router
20
The Network Configuration Screen
The Network Configuration screen consists of three areas: LAN
Configuration, WAN Configuration and WAN settings.
The LAN Configuration Tab
LAN Configuration
Allows you to modify the LAN parameters, and if you want to
enable DHCP automatic IP address assignments, you can
enable it here, and specify a Start and End address for the IP
range.
Force IP-MAC Mapping
Allows you to manually assign a specific IP address to a
specific network device (MAC address) on the network. This
will be updated in the ARP table automatically.
To Next Page
Loading...