GN-B49G High-Speed Wireless Broadband Router
21
The WAN Configuration Tab
The B49G has many advanced WAN configuration features. As a
special redundant feature, you can configure up to 4 WAN
connections and each may have its own connection type (PPPoE,
PPPoE Unnumber, Dynamic IP address, Static IP address) and other
properties. The device can automatically attempt to connect to these
in order if your primary connection fails.
Click the Edit button to the right of the ISP that you wish to modify. A
screen will appear allowing you to change the Internet connection type.
(see below) Click the Next button to continue with modifications.
Depending on the WAN type you select, the corresponding WAN
setup screen will appear next.
To Next Page
Loading...