GN-B49G High-Speed Wireless Broadband Router
22
WAN Configuration Tab – Dynamic IP Address
Your Internet Service Provider will supply you with the following
account information you will need:
• ISP Name
• Host Name
• Gateway
• DNS1 and DS2 Address
• DNS Domain Name
Enter the information provided by your ISP in the spaces provided.
MTU (Maximum Transmission Unit)
The largest packet unit is sent from your computer to the network. Any
message larger than MTU will be divided into smaller packets before
being sent. You should keep the default setting (1500).
Setting MTU
size is largely a process of trial-and-error: If you suspect your
MTU setting is causing a connection problem, start with the
maximum value of 1500, and then reduce the size down to
1400 until the problem goes away.
NAT Setup
The Network Address Translation (NAT) is a standard that allows
multiple computers on a private network to share a single IP address.
Universal Plug and Play (UPnP)
is a technology based on Internet
standards and technologies, such as TCP/IP, HTTP, and XML, that
allows devices on a network to automatically connect with other
To Next Page
Loading...