Getting Started
1.3 Charging the Battery
When you take your phone out of box for the first time, the battery isn’t at full of power. Please
charge the battery fully before using.
1. Connect the USB cable to the AC adapter, and then, connect to the device via the USB
cable.
2. Plug the AC adapter to a socket to start the charge.
NOTE:
To ensure safety, do not remove the battery from the phone while the AC adapter is
connected or while it is being charged.
1.4 Turning the Phone On or Off
After installing the SIM card and charging the battery, you are now ready to turn your phone
on.
To turn on your phone
Press and hold the power button until the phone shortly vibrates.
To turn off your phone
1. Press and hold the power button for several seconds.
2. A pop-up window appears, then tap “Power off”.
3. Select “OK” to confirm.
To set your phone to the sleep mode
To set your phone to the sleep mode, press the power button briefly. It will turn the display off.
To turn the display on, press the power button briefly again.
1.5 Lock/Unlock
Unlock the device
Drag lock icon on screen and slide to unlock icon for unlocking the device.
1.6 Initial Settings
Before initializing your device, please remember to insert your SIM card first. When turning on
your phone for the first time or resetting your phone, you need to follow the steps as below:
1. On the “Welcome” screen, you could change the default language, or tap “Start” to continue
the setting.
2. In the screen of “Select Wi-Fi”, you can connect to the Wi-Fi.
Aku A1 ｜1-4
To Next Page
Loading...