Gigabyte GSmart S1200 - Drawing and Recording

S1200│
3-2
will become parts of the drawing. Drawings that do
not cross three ruled lines will be treated as writing.
Select a Drawing
To edit a drawing, select it first.
1. Use the stylus to hold down on a drawing until a
“+” appears. Drag this “+” to select the drawing
you want, and then, lift the stylus.
2. You can cut, copy, and paste the selected
drawings by selecting those items in Menu.
3.3 Record a Message
Create a Recording
1. To add a recording to a note, open a note before
recording. Tap Start > Notes. Then, tap “New” to
create a new note.
2. If there is no Recording Toolbar, tap Menu > View
Recording Toolbar.
3. Move your device’s microphone near your mouth
or other sources of sounds.
4. To start recording, tap .
5. To stop recording, tap
. will be added in
the note.
6. To play a recording, tap
in a note, or tap
in the list of Notes.
The recording can be saved in the list of Notes. Tap
Menu > View Recording Toolbar. Tap
, and then,
tap
.