Gigabyte GV-N210D3-1GI User Manual

- 7 - Hardware Installation
2.2. Hardware Installation
Now that you have prepared your computer, you are ready to install your graphics card.
Step 3.
Plug the display cable into your card; then turn on the computer
and monitor. To connect a D-Sub monitor to your graphics card,
use the D-Sub connector. To connect a flat panel display to your
graphics card, use the DVI-I connector. To connect an HDMI
monitor to your graphics card, use the HDMI connector.
Connect a D-Sub monitor
Connect an HDMI monitor
To Flat Panel DisplayTo D-Sub MonitorTo HDMI Monitor
Step 1.
Locate the PCI Express x16 slot. If necessary, remove the
metal cover from this slot; then align your graphics card with
the PCI Express x16 slot, and press it in firmly until the card is
fully seated.
Step 2.
Replace the screw to fasten the card in place, and replace the
computer cover.
Make sure that the gold edge connector of the graphics card is securely
inserted.
Connect a flat panel display

Gigabyte GV-N210D3-1GI Specifications

General

CUDA	Yes
Shader clock	1405 MHz
Graphics processor	GeForce 210
Maximum resolution	2560 x 1600 pixels
Processor frequency	590 MHz
Graphics processor family	NVIDIA
Maximum analog resolution	2048 x 1536 pixels
Parallel processing technology support	Not supported
Memory bus	64 bit
Memory clock speed	1200 MHz
Graphics card memory type	GDDR3
Discrete graphics card memory	1 GB
DVI-D ports quantity	0
DVI-I ports quantity	1
OpenGL version	3.1
DirectX version	10.1
TV tuner integrated	No
Shader model version	-
Form factor	Half-Height/Half-Length (HH/HL)
Cooling type	Active
Certification	RoHS
Bracket height	Full-Height (FH)
Compatible operating systems	Windows 7
Minimum system power supply	300 W

Weight and Dimensions

Depth	121 mm
Width	197 mm
Height	24 mm