Gigabyte H242-Z11 - Page 14

Hardware Installation - 14 -
Front I/O Per node:
 1 x Power button with LED
 1 x ID button with LED
 1 x Status LED
 1 x Reset button
Total:
 4 x Power button with LED
 4 x ID button with LED
 4 x Status LED
 4 x Reset button
Rear Panel I/O Per node:
 2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID LED
Total:
 8 x USB 3.0
 4 x VGA
 8 x RJ45
 4 x MLAN
 4 x ID LEDs
Backplane I/O  4 x ports
 Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s or PCIe Gen3 x4 per port
TPM  1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010
System
Management
 Aspeed® AST2500 management controller
 Avocent® MergePoint IPMI 2.0 web interface:
 Network settings
 Network security settings
 Hardware information
 Users control
 Services settings
 IPMI settings
 Sessions control
 LDAP settings
 Power control
 Fan proles
 Voltages, fans and temperatures monitoring
 System event log
 Events management (platform events, trap settings, email settings)
 Serial Over LAN
 vKVM & vMedia (HTML5)