Gigabyte H610I - Page 8

- 8 -
USB  Chipset:
- 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
- 4 x USB 2.0/1.1 ports on the back panel
 Chipset+USB 2.0 Hub:j
- 2 x USB 2.0/1.1 ports available through the internal USB header
 Chipset+USB 2.0 Hub:k
- 4 x USB 2.0/1.1 ports available through the internal USB headers
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 4-pin ATX 12V power connector
 1 x CPU fan header
 1 x system fan headerj
 2 x system fan headersk
 1 x RGB LED strip header
 1 x M.2 Socket 3 connector
 4 x SATA 6Gb/s connectors
 1 x front panel header
 1 x front panel audio header
 1 x speaker header
 1 x USB 3.2 Gen 1 header
 1 x USB 2.0/1.1 headerj
 2 x USB 2.0/1.1 headersk
 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only)
 1 x serial port headerj
 2 x serial port headersk
 1 x Clear CMOS jumper
 1 x chassis intrusion header
Back Panel
Connectors
 1 x PS/2 keyboard/mouse port
 2 x USB 3.2 Gen 1 ports
 4 x USB 2.0/1.1 ports
 1 x D-Sub port
 2 x DisplayPorts
 1 x HDMI port
 1 x RJ-45 port
 3 x audio jacks
I/O Controller  iTE
®
I/O Controller Chip
Hardware
Monitor
 Voltage detection
 Temperature detection
 Fan speed detection
 Fan fail warning
 Fan speed control
* Whether the fan speed control function is supported will depend on the fan you install.
j Only for H610I.
k Only for H610I DDR4.