Gigabyte MC62-G40 - CPU Common Options

- 61 -
BIOS Setup
2-3-1 CPU Common Options
Parameter Description
CPU Common Options
Prefetcher settings
Press[Enter]forcongurationofadvanceditems.

L1 Stream HW Prefetcher
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

L2 Stream HW Prefetcher
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Core Watchdog
Press[Enter]forcongurationofadvanceditems.

Core Watchdog Timer Enable
– Enable/Disable CPU Watchdog Timer.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

Core Watchdog Timer Interval
(Note)
– SpeciestheCPUWatchdogTimerinterval.
– Default setting is Auto.

Core Watchdog Timer Severity
(Note)
– SpeciestheCPUWatchdogTimerSeverity.
– Options available: Auto, No Error, Transparent, Corrected, Deferred,
Uncorrected, Fatal. Default setting is Auto.
Thread Enablement
Press[Enter]forcongurationofadvanceditems.

SMT Control
– Enable/Disable Symmetric Multithreading.
– Options available: Auto, Disable. Default setting is Auto.
(Note) This item appears when Core Watchdog Timer Enable is set to Enabled.