Gigabyte MC62-G40 - Page 68

- 68 -
BIOS Setup
Parameter Description
CADBusConguration
Press[Enter]forcongurationofadvanceditems.

CAD Bus Timing User Controls
– Setup time on CAD bus signals to Auto or Manual.
– Options available: Auto, Manual. Default setting is Auto.

CAD Bus Drive Strength User Controls
– Drive Strength on CAD bus signals to Auto or Manual.
– Options available: Auto, Manual. Default setting is Auto.
DataBusConguration
Press[Enter]forcongurationofadvanceditems.

DataBusCongurationUserControls
– SpeciesthemodefordrivestrengthtoAutoorManual.
– Options available: Auto, Manual. Default setting is Auto.
Common RAS
Press[Enter]forcongurationofadvanceditems.

Data Poisoning
– Enable/Disable the Data Poisoning function.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

DRAM Post Package Repair
– Enable/Disable the DRAM Post Package Repair function.
– Options available: Enable, Disable, Default. Default setting is
Default.

RCD Parity
– Enable/Disable the RCD Parity function.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

DRAM Address Command Parity Retry
– Enable/Disable the DRAM Address Command Parity Retry function.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

Max Parity Error Replay
– CongurestheMaxParityErrorReplay.(0~0x3
f).
– Default setting is 8.
– Please note that this item is congurable when DRAM Address
Command Parity Retry is set to Enabled.

DisableMemoryErrorInjection
– Options available: False, True. Default setting is True.

ECCConguration
– DRAM ECC Symbol Size
»
CongurestheDRAMECCSymbolSize.
»
Options available: Auto, x4, x8, x16. Default setting is Auto.
– DRAM ECC Enable
»
Enable/Disable DRAM ECC. When set to Auto, it will set ECC to
enable.
»
Options available: Auto, Enabled, Disabled. Default setting is
Auto.
– DRAM UECC Retry
»
Enable/Disable DRAM UECC Retry.
»
Options available: Auto, Enabled, Disabled. Default setting is
Auto.