Gigabyte R162-ZA1 - Page 117

- 117 - BIOS Setup
Parameter
Description
CPPC
Enable/Disable the CPPC feature.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
HSMP Support
Enable/Disable the HSMP support.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Diagnostic Mode
Enable/Disable the Diagnostic Mode.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
DLWM Support
Enable/Disable the DLWM support.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
BoostFmaxEn Options available: Auto, Manual. Default setting is Auto.
EDC Current Tracking
The generation a correctable MCE when the telemetry current value is over
the set threshold dened by EDC Current Tracking Current Threshold.
Options available: Enable, Disable. Default setting is Disable.