Gigabyte R162-ZA1 - Front Panel Leds and Buttons

- 19 - System Appearance
2-3 Front Panel LEDs and Buttons
L1
L2
1
3
5
7
2
4
6
8
(Note) If your server features Dual BIOS function, please see the following section for detail LED behavior.
No. Name Color Status Description
1.
Reset Button -- -- Press the button to reset the system.
2.
NMI button -- --
Press the button server generates a NMI to the processor
if the multiple-bit ECC errors occur, which effectively halt
the server.
3.
Power button
with LED
Green On Indicates the system is powered on.
Green Blink System is in ACPI S1 state (sleep mode).
N/A Off
• System is not powered on or in ACPI S5 state (power off)
• System is in ACPI S4 state (hibernate mode)
4.
ID Button
This LED represents the RoT function LED behavior.
Please see the following section for detail LED
behavior.
5.
HDD Status
LED
Green
On
Indicates locating the HDD.
Blink
Indicates accessing the HDD.
Amber On
Indicates HDD error.
Green/
Amber
Blink
Indicates HDD rebuilding.
N/A Off
Indicates no HDD access or no HDD error.
6.
System
Status LED
This LED represents the RoT function LED behavior.
Please see the following section for detail LED
behavior.
7/8.
LAN 1/2
Active/Link
LEDs
Green On
Indicates a link between the system and the network or
no access.
Green Blink
Indicates data trasmission or receiving is occuring.
N/A Off
Indicates no data transmission or receiving is occuring.