Gigabyte R162-ZA1 - Page 13

- 13 - Hardware Installation
Video  Integrated in Aspeed® AST2500
 2D Video Graphic Adapter with PCIe bus interface
 1920x1200@60Hz 32bpp
Storage  10 x 2.5" hot-swappable HDD/SSD bays
- 2 x green HDD trays compatible with NVMe devices only
- 2 x green HDD trays compatible with NVMe or SATA/SAS devices
- 6 x blue HDD trays compatible with SATA/SAS devices only
 1 x M.2 slot:
- - M-key
- - PCIe Gen4 x4
- - Supports NGFF-2280/22110 cards
- Note:
SAS card is required for SAS devices support
SAS

Depends on SAS add-on card
RAID

Depends on SAS add-on card
Internal I/O  1 x M.2 slot
 1 x USB 3.0 header
 1 x COM header
 1 x TPM header
 1 x OCP 3.0 mezzanine slot
 1 x OCP 2.0 mezzanine slot
 1 x Front panel header
 1 x HDD back plane board header
 1 x PMBus connector
 1 x IPMB connector
 1 x Clear CMOS jumper
 1 x BIOS recovery jumper
Front I/O  1 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x NMI button
 1 x Reset button
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED
Rear I/O  2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID button with LED