Gigabyte R162-ZA1 - Page 72

BIOS Setup - 72 -
Parameter
Description
PCI Bus Driver Version
Displays the PCI Bus Driver version information.
SLOT_# Lanes Conguration
(Note1)
Change the PCIe lanes.
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8, x4x4x4x4.
Default setting is Auto.
SLOT Slot # I/O ROM
(Note1)
When enabled, this setting will initialize the device expansion ROM for
the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is Enabled.
SLOT Slot # Max Link
(Note1)
Congure PCIe max link speed.
Options available: Auto, Maximum, Gen1, Gen2, Gen3, Gen4.
Default setting is Auto.
OCP# Lanes
(Note2)
Change mezzanine PCIe lanes.
Options available: Auto, x16, x8x8, x8x4x4, x4x4x8, x4x4x4x4,
Disabled. Default setting is Auto.
OCP# I/O ROM
(Note2)
When enabled, this setting will initialize the device expansion ROM for
the related U.2 device.
Options available: Enabled, Disabled. Default setting is Enabled.
OCP# Max Link Speed
(Note2)
Congure mezzanine OCP max link speed.
Options available: Auto, Maximum, Gen1, Gen2, Gen3, Gen4.
Default setting is Auto.
Onboard LAN Controller
(Note3)
Enable/Disable the onboard LAN controller.
Options available: Enabled, Disabled. Default setting is Enabled.
Onboard LAN1/2 I/O ROM
(Note3)
Enable/Disable the onboard LAN devices, and initializes device
expansion ROM.
Options available: Enabled, Disabled. Default setting is Enabled.
PCI Devices Common Settings
Above 4G Decoding
Enable/Disable memory mapped I/O to 4GB or greater address space
(Above 4G Decoding).
Options available: Enabled, Disabled. Default setting is Enabled.
SR-IOV Support
If the system has SR-IOV capable PCIe devices, this item Enable/Disable
Single Root IO Virtualization Support.
Options available: Enabled, Disabled. Default setting is Disabled.
(Note1) This section is dependent on the available PCIe Slot.
(Note2) This section is dependent on the available OCP connector.
(Note3) This section is dependent on the available LAN controller.