Gigabyte R162-ZA1 - Page 83

- 83 - BIOS Setup
Parameter Description
NIC Conguration

Link Speed
– Allows for automatic link speed adjustment.
– Options available: Auto Negotiated, 10 Mbps Half, 10 Mbps Full,
100 Mbps Half, 100 Mbps Full. Default setting is Auto Negotiated.

Wake On LAN
– Enables power on of the system via LAN. Note that conguring
Wake on LAN in the operating system does not change the value of
this setting, but does override the behavior of Wake on LAN in OS
controlled power states.
– Options available: Enabled/Disabled. Default setting is Enabled.
Blink LEDs
Identies the physical network port by blinking the associated LED.
Press the numeric keys to adjust desired values.
UEFI Driver
Displays the technical specications for the Network Interface Controller.
Adapter PBA
Displays the technical specications for the Network Interface Controller.
Device Name
Displays the technical specications for the Network Interface Controller.
Chip Type
Displays the technical specications for the Network Interface Controller.
PCI Device ID
Displays the technical specications for the Network Interface Controller.
PCI Address
Displays the technical specications for the Network Interface Controller.
Link Status
Species the link status of the port.
MAC Address
Displays the MAC address of the Ethernet controller.
Virtual MAC Address
Displays the virtual MAC address of the Ethernet controller.