- 25 - System Hardware Installation
3-1 Removing Chassis Cover
Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the chassis cover:
1. Remove the screw securing the chassis cover.
2. Push button to unlock the handle.
3. Pull the grip handle to open the panel cover.
4. Slide the back chassis cover towards the rear and remove the cover in the direction indicated.
5. Remove the screw securing the middle chassis cover.
6. Slide the middle chassis cover towards the rear and remove the cover in the direction indicated.
7. To reinstall the chassis cover reverse steps 1-6.
2
1
4
3
5
5
6
To Next Page
Loading...
