- 87 - BIOS Setup
Parameter Description
Action on BIST Failure
Action to take when a CCD BIST failure is detected.
Options available: Do nothing, Down-CCD, Auto. Default setting is Auto.
Fast short REP MOVSB
(FSRM)
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Enhanced REP MOVSB/
STOSB (ERMSB)
Options available: Disabled, Enabled, Auto. Default setting is Auto.
REP-MOV/STOS Streaming
Allows REP-MOVS/STOS to use non-caching streaming stores for large
sizes.
Options available: Disabled, Enabled. Default setting is Disabled.
IBS hardware workaround
Sets if using IBS execution sampling without software workaround for
erratum 1,285. May impact performance.
Options available: Auto, Enabled. Default setting is Auto.
To Next Page
Loading...
