Gigabyte R182-34A - PCI Subsystem Settings

BIOS Setup - 56 -
5-2-4 PCI Subsystem Settings
Parameter
Description
PCI Bus Driver Version
Displays the PCI Bus Driver version information.
Slot # I/O ROM
(Note)
When enabled, this setting will initialize the device expansion
ROM for the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is Enabled.
Slot # Lanes
(Note)
Change the PCIe lanes.
Options available: Auto, x16, x8x8, x8x4x4, x4x4x8, x4x4x4x4.
Default setting is Auto.
Slot # Max Link Speed
(Note)
Congure PCIe max link speed.
Options available: Auto, Gen1, Gen2, Gen3, Gen4.
Default setting is Auto.
OCP30 I/O ROM
Enable/Disable the OCP3.0 slot I/O ROM.
Options available: Enabled, Disabled. Default setting is Enabled.
OCP30 Lanes
Change the OCP3.0 PCIe lanes.
Options available: Auto, x16, x8x8, x8x4x4, x4x4x8, x4x4x4x4.
Default setting is Auto.
OCP30 Max Link Speed
Congure OCP3.0 PCIe max link speed.
Options available: Auto, Gen1, Gen2, Gen3, Gen4.
Default setting is Auto.
(Note) This section is dependent on the available PCIe Slot.