Gigabyte R182-34A - Page 84

BIOS Setup - 84 -
Parameter
Description
PCIe Error Enabling
Press [Enter] to congure advanced items.

PCIE Error
– Enable/Disable PCIE error.
– Options available: Enable, Disable. Default setting is Enable.

Uncorrected Error
– Options available: Enable, Disable. Default setting is Enable.

Fatal Error Enable
– Options available: Enable, Disable. Default setting is Enable.

Assert NMI on SERR
– Options available: Enable, Disable. Default setting is Enable.

Assert NMI on PERR
– Options available: Enable, Disable. Default setting is Enable.