Gigabyte R182-M80 - Intel Optane DCPMM DIMM Population Rule

System Hardware Installation
- 32 -
3-5-5 Intel Optane DCPMM DIMM Population Rule
Thermal conditions for DCPMM DIMM support:
• The ambient temperature must be at or below 35°C
• The 3rd Generation Intel® Xeon® Scalable Processors used must have a maximum TDP of 270W
• A maximum of 16 pcs 512G DCPMM may be installed
• RDIMM / DCPMM must be installed into CPU0 memory rst
• You must install one RDIMM into any slot #0 of CPU0 before installing the DCPMM.
(e.g. A0/B0/C0/D0/E0/F0/G0/H0/I0/J0/K0/L0/M0/N0/O0/P0)
• The DCPMM must be installed into the DIMM slot #1 next to the corresponding RDIMM
in slot #0 (e.g. if RDIMM is installed into DIMM slot A0, the DCPMM must be installed into
DIMM slot A1)
CPU1
CPU0
F0/RDIMM Slot
F1/Intel Optane DCPMM Slot
E0/RDIMM Slot
E1/Intel Optane DCPMM Slot
H0/RDIMM Slot
H1/Intel Optane DCPMM Slot
G0/RDIMM Slot
G1/Intel Optane DCPMM Slot
K1/Intel Optane DCPMM Slot
K0/RDIMM Slot
L1/Intel Optane DCPMM Slot
L0/RDIMM Slot
I1/RIntel Optane DCPMM Slot
I0/IRDIMM Slot
J1/Intel Optane DCPMM Slot
J0/Intel RDIMM Slot
C1/Intel Optane DCPMM Slot
C0/RDIMM Slot
D1/Intel Optane DCPMM Slot
D0/RDIMM Slot
A1/Intel Optane DCPMM Slot
A0/RDIMM Slot
B1/Intel Optane DCPMM Slot
B0/RDIMM Slot
N0/RDIMM Slot
N1/Intel Optane DCPMM Slot
M0/RDIMM Slot
M1/Intel Optane DCPMM Slot
P0/RDIMM Slot
P1/Intel Optane DCPMM Slot
O0/RDIMM Slot
O1/Intel Optane DCPMM Slot