Gigabyte R272-Z31 - Product Specifications

Hardware Installation - 12 -
1-2 Product Specications
Socket
Socket
CPU  AMD EPYC™ 7002 series processor family
 Single processor, 7nm, Socket SP3
 Up to 64-core, 128 threads
 TDP up to 225W
Socket
Socket
Chipset
 System on Chip
Socket
Socket
Memory  16 x DIMM slots
 DDR4 memory supported only
 8-channel memory architecture
 RDIMM modules up to 64GB supported
 LRDIMM modules up to 128GB supported
 Memory speed: Up to 3200 MHz w/1DPC, 2933MHz w/2DPC
Socket
Socket
LAN  2 x 1Gb/s LAN ports (Intel® I350)
 1 x 10/100/1000 management LAN
Socket
Socket
Expansion Slot  Riser Card CRS1021:
 - 2 x PCIe x8 slots (Gen3 x8), Low prole half-length

 Riser Card CRS1015:
 - 1 x PCIe x16 slot (Gen3 x16), Low prole half-length

 2 x OCP mezzanine slots
 - PCIe Gen3 x16
 - Type1, P1, P2, P3, P4, K2, K3
Socket
Socket
Video  Integrated in Aspeed® AST2500
 2D Video Graphic Adapter with PCIe bus interface
 1920x1200@60Hz 32bpp, DDR4 SDRAM
Socket
Socket
Storage
(R272-Z30)
 12 x 3.5" hot-swappable HDD bays
 SAS card is required for SAS devices support
(R272-Z31)  24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
 SAS card is required for SAS devices support
(R272-Z32)  24 x 2.5" U.2 hot-swappable HDD/SSD bays
Socket
Socket
SAS  Supported via add-on SAS Card
Socket
Socket
Front Panel
LED/Buttons
 2 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x NMI button
 1 x Reset button
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED