EasyManua.ls Logo

Gigabyte R272-Z31 - MAC Ipv4 Network Configuration

Gigabyte R272-Z31
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BIOS Setup - 83 -
5-2-18 MAC IPv4 Network Conguration
Parameter Description
Congured
Indicates whether network address is congured successfully or not.
Options available: Enabled, Disabled. Default setting is Disabled.
Enable DHCP
(Note)
Options available: Enabled, Disabled. Default setting is Enabled.
Local IP Address
(Note)
Press [Enter] to congure local IP address.
Local NetMask
(Note)
Press [Enter] to congure local NetMask.
Local Gateway
(Note)
Press [Enter] to congure local Gateway
Local DNS Servers
(Note)
Press [Enter] to congure local DNS servers
Save Changes and Exit Press [Enter] to save all congurations.
(Note) This item appears when Congured is set to Enabled.

Table of Contents

Other manuals for Gigabyte R272-Z31

Related product manuals