Gigabyte R282-3C0 User Manual

BIOS Setup - 78 -
Parameter
Description
NIC Conguration
Press [Enter] to congure advanced items.

Link Speed
– Allows for automatic link speed adjustment.
– Options available: Auto Negotiated, 10 Mbps Half, 10 Mbps Full,
100 Mbps Half, 100 Mbps Full. Default setting is Auto Negotiated.

Wake On LAN
– Enables power on of the system via LAN. Note that conguring
Wake on LAN in the operating system does not change the value of
this setting, but does override the behavior of Wake on LAN in OS
controlled power states.
– Options available: Enabled, Disabled. Default setting is Enabled.
Blink LEDs
Identies the physical network port by blinking the associated LED.
Press the numeric keys to adjust desired values (up to 15 seconds).
UEFI Driver
Displays the technical specications for the Network Interface Controller.
Adapter PBA
Displays the technical specications for the Network Interface Controller.
Device Name
Displays the technical specications for the Network Interface Controller.
Chip Type
Displays the technical specications for the Network Interface Controller.
PCI Device ID
Displays the technical specications for the Network Interface Controller.
PCI Address
Displays the technical specications for the Network Interface Controller.
Link Status
Displays the technical specications for the Network Interface Controller.
MAC Address
Displays the technical specications for the Network Interface Controller.
Virtual MAC Address
Displays the technical specications for the Network Interface Controller.

Gigabyte R282-3C0 Specifications

General

Brand	Gigabyte
Model	R282-3C0
Category	Server
Language	English