Gigabyte R282-Z94 - Rot Leds

System Appearance - 20 -
7/8.
LAN1/2
Active/
Link LED
Green On
Indicates a link between the system and the network or no
access.
Green Blink
Indicates data trasmission or receiving is occuring.
N/A Off
Indicates no data transmission or receiving is occuring.
(Note) If your server features RoT function, please see the following section for detail LED behavior.
2-3-1 RoT LEDs
L1 L2
Status LE
D
ID LED
LED on Front panel
(Note5)
ID LED Status LED
EC Firmware (FW) Authentication fail or not exit
EC FW is broken or not exit
(Note1)
OFF OFF
Authenticating/Recovering BMC/BIOS Images
Authenticating Images
OFF OFF
Recovering BMC Active Flash
Blinks Blue
4 times per
second
Blinks Green
4 times per
second
Recovering BIOS Active Flash
Blinks Blue
4 times per
second
Blinks Green
4 times per
second
Authentication (AUTH) Pass
Recovering BIOS Active Flash
OFF OFF
BMC : AUTH pass after doing recovery
BIOS : AUTH pass after doing recovery
OFF OFF
BMC : AUTH pass after doing recovery
BIOS : AUTH pass
OFF OFF
BMC : AUTH pass
BIOS : AUTH pass after doing recovery
OFF OFF