- 13 - Hardware Installation
Socket
Socket
Security
Security
Expansion Slot
Riser Card CRS2015:
1 x PCIe x16 slot (Gen4 x16), HHHL, occupied by CNV3134, 4 x NVMe
HBA
Riser Card CRS2026:
1 x PCIe x16 slot (Gen4 x16), FHHL, occupied by GRAID SupremeRAID
SR-1000 NVMe/NVMe-oF RAID Card
1 x PCIe x16 slot (Gen4 x16), FHHL
Riser Card CRS2033:
1 x PCIe x16 slot (Gen4 x16), FHHL, occupied by CNV3134, 4 x NVMe
HBA
1 x PCIe x8 slot (Gen4 x8), FHHL, occupied by CNV3132, 2 x NVMe
HBA
1 x PCIe x8 slot (Gen4 x8), FHHL, occupied by CNV3132, 2 x NVMe
HBA
1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0
Supported NCSI function, occupied by CNV9134, 4 x NVMe HBA
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth (Type1, P1, P2)
Supported NCSI function, occupied by CNVO132, 2 x NVMe HBA
1 x M.2 slot:
M-key
PCIe Gen4 x4
Supports 2242/2260/2280/22110 cards
CPU TDP is limited to 225W if using M.2 device
Socket
Socket
Security
Security
Internal I/O
1 x M.2 slot
1 x USB 3.0 header
1 x COM header
1 x TPM header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
To Next Page
Loading...
