Gigabyte R282-Z9G - Page 14

Hardware Installation - 14 -
Socket
Socket
Security
Security
Front I/O
 2 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x Reset button
 1 x NMI button
 1 x System status LED
 1 x HDD activity LED
 2 x LAN activity LEDs
Socket
Socket
Security
Security
Rear I/O
 2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID button with LED
Socket
Socket
Security
Security
Backplane I/O
 Front side_CBP20O8: 20 x Gen4 NVMe ports
 Rear side_CBP2022: 2 x SATA/SAS ports
 Speed and bandwidth: SATA 6Gb/s, SAS 12Gb/s or Gen4 PCIe x4 per port
Socket
Socket
Security
Security
TPM
 1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010
Socket
Socket
Security
Security
Power Supply
 2 1600W redundant PSUs
 80 PLUS Platinum
AC Input:
 100-120V~/ 12A, 50-60Hz
 200-240V~/ 10.0A, 50-60Hz
DC Input:
 240Vdc, 10A
DC Output:
 Max 1000W/ 100-120V~
 +12V/ 81.5A
 +12Vsb/ 2.5A
 - Max 1600W at 200-240V or 240Vdc Input
 +12V/ 133A
 +12Vsb/ 2.5A