Gigabyte TRX40 AORUS XTREME - Page 64

- 64 -
Conguring a RAID Set
Step 4:
On the Select Physical Disks screen, select the hard drives to be included in the RAID array and set them to
Enabled. Next, use the down arrow key to move to Apply Changes and press <Enter> (Figure 5).Then return
to the previous screen and set the Array Size, Array Size Unit, Read Cache Policy and Write Cache Policy.
Step 5:
After setting the capacity, move to Create Array and press <Enter> to begin. (Figure 6)
Figure 5
Figure 6