Gigabyte Z390 AORUS MASTER - Page 11

- 11 -
Hardware Installation
Storage Interface  Chipset:
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and
PCIe x4/x2 SSD support) (M2M)
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and
PCIe x4/x2 SSD support) (M2A)
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2 SSD
support) (M2P)
- 6 x SATA 6Gb/s connectors
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to "1-9 Internal Connectors," for the installation notices for the PCIEX4, M.2
and SATA connectors.
 Intel
®
Optane
™
Memory Ready
USB  Chipset:
- 1 x USB Type-C
™
port with USB 3.1 Gen 2 support, available through the
internal USB header
- 1 x USB Type-C
™
port on the back panel, with USB 3.1 Gen 2 support
- 3 x USB 3.1 Gen 2 Type-A ports (red) on the back panel
- 4 x USB 3.1 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
 Chipset+USB 2.0 Hub:
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Internal
Connectors
 1 x 24-pin ATX main power connector
 2 x 8-pin ATX 12V power connectors
 1 x CPU fan header
 1 x water cooling CPU fan header
 4 x system fan headers
 2 x system fan/water cooling pump headers
 2 x digital LED strip headers
 2 x digital LED strip power select jumpers
 2 x RGB LED strip headers
 3 x M.2 Socket 3 connectors
 6 x SATA 6Gb/s connectors
 1 x front panel header
 1 x front panel audio header
 1 x S/PDIF Out header
 1 x USB Type-C
™
port, with USB 3.1 Gen 2 support
 1 x USB 3.1 Gen 1 header
 2 x USB 2.0/1.1 headers
 1 x Thunderbolt
™
add-in card connector
 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
 1 x OC button
 1 x reset button