- 24 -
1-8 Onboard LEDs and Buttons
CPU/DRAM/VGA/BOOT (Status LEDs)
The status LEDs show whether the CPU, memory, graphics card, and operating system are working properly
after system power-on. If the CPU/DRAM/VGA LED is on, that means the corresponding device is not working
normally; if the BOOT LED is on, that means you haven't entered the operating system yet.
CPU: CPU status LED
DRAM: Memory status LED
VGA: Graphics card status LED
BOOT: Operating system status LED
CPU DRAM
VGA BOOT
Quick Button
This motherboard has reset button. The reset button allows users to quickly turn on/off the computer in an open-
case environment when they want to change hardware components or conduct hardware testing.
RST_SW
To Next Page
Loading...
