EasyManua.ls Logo

Gigabyte Z390 AORUS XTREME - USB Turbocharger

Gigabyte Z390 AORUS XTREME
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Unique Features
- 118 -
5-2-17 USB TurboCharger
GIGABYTE USB TurboCharger supports the quick charging technologies
(Note 1)
of Apple's and Android
QC 3.0's smart phones/tablet devices. It allows you to quick-charge your device(s) connected to the front
USB 3.1 Gen 1 type A port (s) with the required mode.
The USB TurboCharger Interface
Using USB TurboCharger
The quick-charging performance of each connector may vary by the device used. Refer to the table below to
select a proper way to charge:
Apple Android
QC 3.0
Standard Used as a normal USB 3.1 Gen 1 port Used as a normal USB 3.1 Gen 1 port
Quick Charge
(Note 2)
a
* Provides maximum output power of 10 W
a
* Provides maximum output power of 18 W
Apple Fast Charge
(Note 3)
a
* Provides maximum output power of 15 W
r
a: Supports quick-charge, r: Not support quick-charge.
While the system is in S3/S4, the Quick Charge and Apple Fast-Charge modes can only deliver 5V
standby power, and the two front USB ports together can provide a total power of up to 10 W and do
not support PME Event Wake Up function.
(Note 1) Quick-charging protocols supported: Apple and Samsung
®
dividerchargingproleat5V@2.4Aand
5V@2A, Qualcomm
®
Quick Charge 3.0
at 3.6V~12V (QC3.0), backward compatible Quick Charge
2.0
at5V/9V/12V(QC2.0),BatteryChargingSpecicationv1.2DCP5V@1.5A.
(Note2) Theletransferfunctionisnotsupportedinthismode.
(Note 3) This is the recommended mode when Apple iPhone 8 / iPhone 8 plus / iPhone X is connected.

Table of Contents

Related product manuals