Gigabyte Z590 AORUS PRO AX - Page 9

- 9 -
Step 3:
Launch the Intel
®
Optane
™
Memory and Storage
Management application from the Start menu and
make sure the Intel
®
Optane
™
Memory has been
enabled.
Step 4:
If you want to accelerate the system drive, you
can select specic folders, les, or applications to
accelerate using the Intel
®
Optane
™
Memory Pinning
function. (The Optane
™
memory used must have at
least 32 GB capacity.)
• An Optane
™
memory cannot be used to accelerate an M.2 PCIe SSD.
• If more than one Optane
™
memory is installed, you can select only one of them to accelerate your
SATA-based boot drive. The other(s) can only be used as data drive(s).
• Do not abruptly remove the Optane
™
memory. Doing so will cause the operating system to stop
functioning correctly.
• If you want to change/remove the Optane
™
memory, you must disable it using the Intel
®
Optane
™
Memory and Storage Management application rst.
• After enabling the Optane
™
memory, the related BIOS settings will remain even after a BIOS update.