Gigabyte Z590 AORUS XTREME - Page 29

- 29 -
Hardware Installation
8) LED_C1/LED_C2(IntegratedExtensionCableHeadersforAddressableandRGBLEDStrips)
Connect the included integrated extension cable for addressable and RGB LED strips to the header. The
othertwoendsofthecablecanrespectivelyconnecttoastandard5050RGBLEDstrip(12V/G/R/B),with
maximum power rating of 2A (12V) and maximum length of 2m and a standard 5050 addressable LED
strip, with maximum power rating of 5A (5V) and maximum number of 1000 LEDs. Before connecting your
LED strip, remove the cap from the integrated extension cable. The power pin of the LED strip must be
connected to Pin 1 of the LED strip header. Incorrect connection may lead to the damage of the LED strip.
Forhowtoturnon/offthelightsoftheLEDstrip,refertotheinstructionsoninChapter5,"Unique
Features," "APP Center\RGB Fusion."
RGB LED strip
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
Addressable
LED strip
Addressable LED Strip Connector:
Pin No. Denition
1 V (5V)
2 D
3 No Pin
4 G
RGB LED Strip Connector:
Pin No. Denition
1 12V
2 G
3 R
4 B
Integrated extension cable for
addressable and RGB LED strips