Gigabyte Z590 AORUS XTREME - Page 56

BIOS Setup
- 56 -
& LEDs in System Power On State
Allows you to enable or disable motherboard LED lighting when the system is on.
Off Disables the selected lighting mode when the system is on.
On Enables the selected lighting mode when the system is on. (Default)
& LEDs in Sleep, Hibernation, and Soft Off States
 AllowsyoutosetthelightingmodeofthemotherboardLEDsinsystemS3/S4/S5state.
 ThisitemiscongurablewhenLEDs in System Power On State is set to On.
Off  DisablestheselectedlightingmodewhenthesystementersS3/S4/S5state.(Default)
On  EnablestheselectedlightingmodewhenthesystementersS3/S4/S5state.
& RST_SW (MULTIKEY) (Functionality of the RST_SW Button)
Set this button to HW Reset Use the button to reset your system. (Default)
SetthisbuttontoSwitchLEDOn/Off Usethebuttontoturnon/offthemotherboardLEDs.
Set this button to Enter BIOS Setup Use the button to enter the BIOS Setup.
Set this button to Boot on Safe Mode Use the button to boot the system in safe mode.
& Onboard DB Port LED
Allows you to enable or disable the LED lighting of the motherboard debug LEDs when the system is on.
(Default: On)
& Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
PTT Technology. (Default: Disabled)
& 3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
& CPU PCIe Link Speed
Allows you to set the operation mode of the CPU-controlled PCI Express slots to Gen 1, Gen 2, Gen 3, or
Gen 4
(Note)
.Actualoperationmodeissubjecttothehardwarespecicationofeachslot.AutoletstheBIOS
automaticallycongurethissetting.(Default:Auto)
& PCH PCIe Link Speed
Allows you to set the operation mode of the Chipset-controlled PCI Express slots to Gen 1, Gen 2 or Gen 3.
Actualoperationmodeissubjecttothehardwarespecicationofeachslot.AutoletstheBIOSautomatically
congurethissetting.(Default:Auto)
 Miscellaneous
(Note) This item is present only when you install a CPU that supports this feature.