Gigabyte Z590M - Page 34

& IPv6 HTTP Support
 EnablesordisablesHTTPbootsupportforIPv6.ThisitemiscongurableonlywhenNetwork Stack is
enabled.
& PXE boot wait time
 Allowsyoutocongurehowlongtowaitbeforeyoucanpress<Esc>toabortthePXEboot.
& Media detect count
Allows you to set the number of times to check the presence of media.
 NVMeConguration
 DisplaysinformationonyourM.2NVMEPCIeSSDifinstalled.
 SATAAndRSTConguration
& SATA Controller(s)
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& SATA Mode Selection
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheChipsetorcongurestheSATAcontrollers
to AHCI mode.
IntelRSTPremiumWithIntelOptaneSystemAcceleration EnablesRAIDfortheSATAcontroller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATAcontrollers.(Default:Disabled)
& Port 0/1/2/3/4/5
 EnablesordisableseachSATAport.(Default:Enabled)
& SATA Port 0/1/2/3/4/5 DevSlp
 AllowsyoutodeterminewhethertolettheconnectedSATAdevicegointosleepmode.(Default:Disabled)
& Hot plug
 EnablesordisablethehotplugcapabilityforeachSATAport.(Default:Disabled)
& ConguredaseSATA
Enables or disables support for external SATA devices.
 Intel(R) Ethernet Controller
 Thissub-menuprovidesinformationonLANcongurationandrelatedcongurationoptions.
 Miscellaneous
& LEDs in System Power On State
 AllowsyoutoenableordisablemotherboardLEDlightingwhenthesystemison.
Off   Disablestheselectedlightingmodewhenthesystemison.
On   Enablestheselectedlightingmodewhenthesystemison.(Default)
& LEDs in Sleep, Hibernation, and Soft Off States
 AllowsyoutosetthelightingmodeofthemotherboardLEDsinsystemS3/S4/S5state.
 ThisitemiscongurablewhenLEDs in System Power On State is set to On.
Off   DisablestheselectedlightingmodewhenthesystementersS3/S4/S5state.(Default)
On Enables the selected lighting mode when the system enters S3/S4/S5 state.
(Note)  ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.
- 34 -