Gigabyte Z790 AORUS XTREME X - Page 23

- 23 -
8) LED_C (Integrated Extension Cable Header for Addressable RGB Gen2 LED Strips and
RGB LED Strips)
Connect the included integrated extension cable for addressable RGB Gen2 LED strips and RGB LED
strips to the header. The cable can connect up to three standard 5050 addressable RGB Gen2 LED strips,
each with a maximum power rating of 3A (5V) and a maximum of 256 LEDs, as well as three standard 5050
RGB LED strips (12V/G/R/B), each with a maximum power rating of 2A (12V) and a maximum length of
2m. Before connecting your LED strips, remove the caps from the integrated extension cable. The power
pin of the LED strip must be connected to Pin 1 of the LED strip header. Incorrect connection may lead to
the damage of the LED strip.
Addressable RGB Gen2 LED Strip
Header:
Pin No. Denition
1 V (5V)
2 Data
3 No Pin
4 GND
RGB LED Strip Header:
Pin No. Denition
1 12V
2 G
3 R
4 B
Integrated extension cable for
addressable RGB Gen2 LED strips
and RGB LED strips
LED_C
• To avoid abnormal LED behavior, do not connect addressable RGB Gen1 LED strips and
addressable RGB Gen2 LED strips to the same header at the same time.
• Before installing or removing the devices, be sure to turn off the devices and your computer.
Unplug the power cord from the power outlet to prevent damage to the devices.
For how to turn on/off the lights of the LED strip, please navigate to the "Unique Features" page of
GIGABYTE's website.
Addressable RGB Gen2
LED strip
RGB LED strip