Gigabyte Z790 S WIFI DDR4 User Manual

- 9 -
Internal
Connectors
 1 x Q-Flash Plus button
 1 x reset button
 1 x reset jumper
 1 x Clear CMOS jumper
Back Panel
Connectors
 1 x USB 3.2 Gen 2 Type-A port (red)
 2 x USB 3.2 Gen 1 ports
 5 x USB 2.0/1.1 ports
 2 x SMA antenna connectors (2T2R) j
 1 x DisplayPort
 1 x HDMI port
 1 x RJ-45 port
 6 x audio jacks
I/O Controller  iTE
®
I/O Controller Chip
Hardware
Monitor
 Voltage detection
 Temperature detection
 Fan speed detection
 Water cooling ow rate detection
 Fan fail warning
 Fan speed control
* Whether the fan (pump) speed control function is supported will depend on the fan
(pump) you install.
BIOS  1 x 256 Mbit ash
 Use of licensed AMI UEFI BIOS
 PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features  Support for GIGABYTE Control Center (GCC)
* Available applications in GCC may vary by motherboard model. Supported functions
of each application may also vary depending on motherboard specications.
 Support for Q-Flash
 Support for Q-Flash Plus
 Support for Smart Backup
Bundled
Software
 Norton
®
Internet Security (OEM version)
 LAN bandwidth management software
Operating
System
 Support for Windows 11 64-bit
 Support for Windows 10 64-bit
Form Factor
 ATX Form Factor; 30.5cm x 24.4cm
* GIGABYTE reserves the right to make any changes to the product specications and product-related information without
prior notice.
j Only for Z790 S WIFI DDR4.
& Please visit the SERVICE/SUPPORT\Utility page on GIGABYTE's website to download the latest version
of apps.
https://www.gigabyte.com/Support/Utility/Motherboard?m=ut

Gigabyte Z790 S WIFI DDR4 Specifications

General

Brand	Gigabyte
Model	Z790 S WIFI DDR4
Category	Motherboard
Language	English