To Next PageTo Next Page
Need help?Do you have a question about the Gigahertz-Optik P-9710-1 and is the answer not in the manual?
Read the user guide carefully before using the device for trouble-free functioning and operational safety.
Device is for optical radiation measurements; no protection against radiation risks from measured objects.
User/owner is solely responsible for consequences arising from device or accessory use.
Device designed for clean environment, avoid direct sunlight, moisture, and unsafe conditions.
Measurement and examination devices for optical radiation detectors, controllable manually or via RS232.
Details power supply, display, interfaces, units, signal amplifier, integration times, and data logging.
Details measurement ranges, slew rates, gain error, and analog output gain for different models.
Step-by-step instructions for connecting and powering on the device.
Explains measurement modes like CW, CW Maximum, Peak Maximum, and Peak to Peak.
Configures integration time, dose parameters, logger settings, and zero adjustment.
Explains effective intensity measurement for signal lights, including inverse square law.
Defines pulse energy as signal integral over time and discusses measurement techniques.
General| Detector | Silicon photodiode |
|---|---|
| Measurement Range | 0.1 pA to 20 mA |
| Resolution | 0.1 pA |
| Power Supply | 9V battery or external power supply |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
