EasyManua.ls Logo

Gigasense II - SPECIFICATIONS

Gigasense II
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User manual GII Anti-Collision System
GIIMAN_US_CA_000_2021-06-15.docx © Gigasense AB Page 7 / 42
If this equipment is used in a manner not specified in this manual, or by Gigasense AB
personnel, protection or function normally provided by this equipment may be
reduced.
The analogue 4-20 mA output must not be used for decisions such as braking and
stopping the crane. The analogue output is only intended for indication such as
distance display via a remote display.
SPECIFICATIONS
Type designation: GII.
Alarm limits' distance: 2
- 40m, the maximum working range varies for different
frequencies from 25m to 50m due to restricted output power (EIRP, see appendix 1.
Accuracy of limits: +/- 1m. To achieve 1 m accuracy for different speeds, the function
SPD (Speed compensation) can be necessary to use.
Sample frequency of the SFCW radar measurement: 128 ms.
Speed range: 0.05 - 5 m/s relative speed between the cranes.
Speed dependence: The alarm limits can be compensated (20 - 1500%) according to
different speeds. Minimum value is 10%.
Relay outputs: 3 switching potential free relay contacts (max. load 250VAC / 8 A).
The Relay outputs are used for braking and stopping the crane movement and
correspond to the alarm limits, Limit 1 and Limit 2. The third
relay output is used for
the failure alarm.
The Limit 1 output relay can be given a pulsing function suitable for a warning lamp.
Analogue output 4-20 mA: for example, a remote display, corresponding to the
distance between the units. 4 mA = 2 m and 20 mA = 40 m (maximum range, see
appendix 1). Normal load 250 Ohms. The output must not be used for decisions.
Supply Voltage complete system: 24 VDC.
Supply Voltage antenna box (should be powered via relay unit): 12 VDC.
Supply Voltage Transponder unit: 12 VDC.
Power consumption Antenna/Transponder unit: 200 mA.
Power consumption Relay box: 100mA.
Permitted ambient temperature: -25 ... +70 °C.
Degree of protection: IP66/67 (Relay unit), IP56 (Antenna unit).
Relative humidity: 10 to 80% (no condensation).
Max. altitude: 2000 m.
Transmitter frequency: 9.9 ... 10.6 GHz, see appendix 1.
Radiated power defined as EIRP, see appendix 1.
SFCW (Stepped Frequency Continuous Wave), see appendix 1.
Dimension’s antenna (H x W x D) 443 x 359 x 294 mm & weight 4.0 kg.
Relay box (H x W x D) 175 x 125 x 75 mm 0.8 kg.
GROSS WEIGHT/DIMENSION: 1 system incl. packing (Unit A + Unit B) =
12.5 kg / 370 x 370 x 330 mm.