Gigaset easy E295 - Page 9

Gigaset easy E295H / SHG US en / A31008-M2961-R351-1-3S19 / starting_SHG.fm / 3/8/23
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Getting started
9
Registering a handset
or
Changing the display language
You can change the display language, if the phone has been set to an incomprehensible
language.
 Menu Press the keys slowly in succession . . . the language set (e.g. English) is
displayed
 Select a different language: Press the control key until the language required is
selected on the display, e.g. Français OK ( = selected)
Setting date and time
Set the date/time so that the correct date and time can be assigned to incoming calls and to
enable the alarm to be used.
 Menu Settings OK Date and Time OK Enter the date (day, month and
year) in 8-digit format OK Enter the time (hours and minutes) in 4-digit format OK
(Display: Saved)
Moving the input position to the left or right:
Press the control key to the left/right
Your phone is now ready for use.
 Place the handset into the charging slot . . . Registering... is shown on the display, the
handset is registered automatically
On the handset
 Menu Settings OK Registration OK Register
Handset Enter the system PIN of the base (default: 0000) OK
On the base
 Within 60 seconds of entering the system PIN, press and hold the registra-
tion/paging key for a minimum of 3 seconds.