Gigawave D-Cam Clip-On User Manual

D-Cam Clip-On Operators Manual Issue 1 Page 1 of 1
UNUM-CCAM-0104
The information contained in this manual remains the property of Gigawave and may not
be used, disclosed or reproduced in any other form whatsoever without the prior written
permission of Gigawave.
D-Cam Clip-On
OPERATORS MANUAL
Copyright 2005 Gigawave Limited

Gigawave D-Cam Clip-On Specifications

General

Brand	Gigawave
Model	D-Cam Clip-On
Category	Receiver
Language	English

Summary

General Safety Information

Health and Safety Precautions

Discusses RF hazards, GaAs/BeO hazards, and Tantalum capacitor precautions.

RF Power Density Limits

Details maximum RF power density limits based on IEEE and ICNIRP guidelines.

System Operation

Operator Controls and Menu Navigation

Explains the LCD display, push buttons, and menu structure for operating the unit.

Channel and Frequency Menu

Encoder Menu Settings

System Configuration – Engineering Menu

Program Channels Configuration

Independently allocates frequencies to sixteen channels in 1MHz steps.

Video Input Selection

Video Format Settings

Preparing for Operation

D-Cam Clip-On Camera Back Preparation

Checks for secure fastening, battery charge, frequency, encoder, audio, and video settings.

Receiving Equipment Setup

D-Cam Clip-On Transmitter Components

Connector Pin Outs

Details pin configurations for SDI/CVBS BNC, Video, Audio, Power, and Remote connectors.

Audio/Video Encoder Functionality

COFDM Modulator Operation

Default Parameter Sets

Default Parameter Set Table

Lists default parameter sets with configurations for COFDM, MPEG, Video, and Audio.