Need help?Do you have a question about the Gilera Runner RST 50 SP and is the answer not in the manual?
Safety precautions during maintenance operations.
Best practices for using parts and tools during maintenance.
Details frame and engine prefix of the vehicle.
Provides physical specifications of the vehicle.
Technical specifications of the engine.
Describes transmission and lists fluid capacities.
Torque values for steering components.
Torque values for frame components.
Torque values for front suspension.
Torque values for front and rear brakes.
Details cylinder and piston fitting specifications.
Test probe data for crankcase, crankshaft, and connecting rod.
Electrical diagram and components for the ignition system.
Tools for bearing and seal operations.
Tools for crankshaft, crankcase, and pulley work.
Tools for electrical system checks and diagnostics.
Schedule for maintenance operations based on time and mileage.
Procedures for spark plug and hub oil maintenance.
Procedures for coolant and brake fluid level checks.
Diagnosing poor performance, starting, and overheating engine issues.
Diagnosing battery and general electrical system faults.
Diagnosing steering, suspension, and road holding issues.
Instructions for battery care, charging, and maintenance.
Explanation of dashboard indicators and instrument unit connectors.
Procedures for ignition circuit and stator checks.
Step-by-step guide to removing the engine from the vehicle.
Procedures for automatic transmission cover and kickstart.
Procedures for removing and refitting crankshaft bearings.
Procedures for front wheel and hub maintenance.
Procedures for handlebar and steering column.
Overhaul and replacement of front fork components.
Procedures for front and rear brake calipers.
Maintenance of front brake disc and pads.
Procedure to fill and bleed the brake system.
Procedures for seat, handlebar, and headlight removal.
Procedures for fuel tank and air filter removal.
Procedures for helmet bay and legshield removal.
Pre-delivery checks for appearance and torque settings.
Procedures for road tests and functional inspections.
Time estimates for engine component repairs.
Time estimates for transmission component repairs.
Time estimates for chassis component repairs.
To Next Page
General
