To Next PageTo Next Page
Need help?Do you have a question about the Gill MaxiMet GMX200 and is the answer not in the manual?
General| Type | Compact Weather Station |
|---|---|
| Measurement Parameters | Wind speed, wind direction, temperature, humidity, pressure, rainfall |
| Wind Speed Range | 0 to 60 m/s |
| Humidity Range | 0 to 100% RH |
| Ingress Protection | IP66 |
| Wind Direction Range | 0 to 359 degrees |
| Wind Direction Accuracy | ±3 degrees |
| Humidity Accuracy | ±2% RH |
| Pressure Range | 600 to 1100 hPa |
| Pressure Accuracy | ±0.5 hPa |
| Power Supply | 5 to 30 V DC |
| Output | RS-485 |
| Connectivity | Serial |
General introduction to the MaxiMet sensor units, their robustness, and user-selectable features.
Details the standard and derived parameters measured by GMX200 and GMX600 models.
Provides detailed technical specifications for wind, temperature, humidity, pressure, and rain measurements.
Lists supplied and optional equipment, including connector and cable assembly details.
Covers general installation advice, interference prevention, and wind exposure recommendations.
Details mounting tube requirements, alignment using North Pointers, and compass considerations.
Explains how to use the MetSet software to configure device settings, including Comms, Wind, and Reporting pages.
Guides on configuring MaxiMet for SDI-12, MODBUS, and NMEA output protocols and their parameters.
Describes methods for viewing data strings using MetSet software or a terminal program.
Outlines procedures for entering Safe Mode to recover communication and change settings.
Provides guidance on cleaning sensors, handling the unit, and servicing specific components like precipitation and wind sensors.
Lists common problems, their solutions, and interprets sensor status and wind status codes.
Details procedures for returning the unit for service and warranty conditions.
